A glycol chiller is chosen by four numbers before it is chosen by a model: the heat load in tons, the leaving fluid temperature, where the unit will sit and the power that reaches it. Every unit we list is rated at 50°F leaving fluid, and capacity falls with the setpoint - to about 0.60 of that rating at 30°F - so a brewery crashing at 28°F needs more nameplate than its load alone suggests. The five capacity ranges below divide the line so that a duty lands in exactly one of them.
Tank volume, crash rate, setpoint and ambient, worked through in the order we ask about them on a call.
SELECT
Where the heat can go decides the format: a package on a pad, a remote condenser, or tower water.
SELECT
Start from the model number on the chiller you run now, and we name the unit that replaces it.
SELECTBEFORE YOU REQUEST A QUOTE
Load in tons. It comes from tank volume, how fast the product has to come down and the warmest day the unit will see. If you have the load in BTU/hr, divide by 12,000.
Leaving fluid temperature. Anywhere from about 20°F to 80°F; a brewery crash loop sits near 25°F, mold and jacket cooling far warmer. Indoor or outdoor, air- or water-cooled. An air-cooled unit indoors adds its compressor heat to the room; a remote condenser sends it outdoors, a water-cooled unit sends it to the tower.
Glycol and voltage. Food-grade propylene or industrial ethylene and the mix you run, plus the supply at the pad - single-phase stops at 1.5 tons. Send those with your application, or email Sales@HeatX.com, and the quote comes back sized.
Call and talk it through with an engineer: 1-805-484-2992